Hydrofuse is a new concept in fertilizing that works with existing irrigation systems and automatically dispenses fertilizers to all lawns and gardens.
This quality patented product, made exclusively in the USA, is designed to provide many years of reliable use and requires only minimal maintenance.
The Hydrofuse system will work with virtually any common residential irrigation system that uses a controller and separate 24 VAC valves.
SEE FEATURES
SMART HYDRO-DOSING
Hydrofuse injects the specified amount of fertilizer when flow is detected from your sprinkler system.
EASY TO ACCESS
Easy above-ground installation so you have no problem refilling fertilizer when the light is low.
FERTILIZER FREEDOM
Use ANY water soluble fertilizer! You aren't bound to a specific brand with Hydrofuse!
TRUE INJECTION SYSTEM
Uses a pump to inject an exact micro-dosage of fertilizer so you are never wasting fertilizer!
LEARN MORE
PURCHASE
Is your system not working at all?
1. Check that you have the Fertilizer switch turned to the ON position.
2. Check to see if the Power LED is on, if not check if the electrical wall outlet is live by plugging in a lamp or appliance.
3. Check to see that the LOW FLUID light is on. If so, add more concentrate until it turns off, and then try the machine again.
If it still doesn’t operate then check with your installer or local distributor.
Are some of your zones not working?
The Hydrofuse machine is capable of activating and treating up to 6 zones. If some zones are not functioning when the Hydrofuse System operates please call your installer or local distributor.
Does your lawn not appear to be fully fertilized?
1. Check that the Low Fluid Light is not blinking. If it is then refill the reservoir with 100% concentrate fertilizer.
2. Make sure you are using 100% concentrate fertilizer. 100% concentrate is the only concentrate that will work correctly with the system.
3. Check that the system is delivering concentrate to all the areas (zones) that have a fertilizer issue. You will be able to smell it by walking around the property after the system has just run a treatment cycle.
4. Check that the irrigation spray heads are all operative and not jammed or partially blocked.
If all the above points are okay, please call your installer or local distributor for further assistance.
The system isn't working at all
Some zones aren't working
My lawn doesn’t appear to be fully fertilized